Devon IT HC12 Bedienungsanleitung PDF herunterladen (Seite 12)

ThinManage 3.1 Administration Manual

ThinManage Network Configuration

DHCP Configuration (default)

The next screen is the Networking configuration menu. By default, the ThinManage Appliance will attempt to

acquire an IP Address from DHCP on your LAN. The fourth option will read “Change eth0 inet dhcp <ip-

address> <subnet mask>”. If DHCP was successful, then no further configuration is required and you may

select No Changes and press Enter to continue.

Static IP Configuration

If DHCP is not available on your LAN, then you will have to manually set a static IP address for the ThinManage

server. Select option Change eth0... from the Networking menu.

1. On the next screen named, Configuring eth0, select option Static and press the OK button to continue.

2. Enter a static IP address at this time. Press OK to continue.

3. Enter the subnet mask and then press OK to continue.

4. Enter the Gateway IP address and press OK.

5. Once these three values have been entered, you will be asked to confirm the new static settings. Select Yes to apply

the new settings. Otherwise, select No, to discard these changes.

6. After selecting Yes, the network interface will restart and you will be presented with the ThinManage Appliance

Main Menu.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 59 60

Keine Kommentare

Devon IT HC12 Bedienungsanleitung Seite 12